Hot-swap (drives, PSU, fans)
Hot-swap means you can remove and replace a component while the server keeps running, with no shutdown. It applies to drives in a backplane, redundant power supplies, and fan modules, and requires a chassis and backplane designed for live insertion.
Hot-swap drive bays use a backplane and carrier that stage power and data connections in the right order during insertion, so the drive joins the array without corrupting it. Redundant power supplies hot-swap because a second unit carries the full load while you pull the failed one. Fan modules hot-swap on servers where the remaining fans spin up to cover airflow during the swap.
Hot-swap is not the same as redundancy. A single hot-swap PSU still means downtime if it fails; you need at least two in a 1+1 setup for the swap to happen live. For drives, RAID or a similar layout provides the redundancy that lets you replace a failed member without data loss.
For buyers, verify that both the chassis and the specific drive carriers support hot-swap, and that the RAID controller supports online rebuild. Some low-cost trays are cabled, not backplaned, which forces a shutdown. Ask the seller to confirm hot-swap on drives, PSU, and fans separately, since a chassis may support one but not all three.
Related
More in Hardware
- Rack unit (U) and 1U/2U/4U form factorsA rack unit (U) is 1.75 inches (44.45 mm) of vertical space in a standard 19-inch rack. A 1U server is one unit tall, a 2U is two, a 4U is four. Taller chassis fit more drives, larger coolers, and full-height GPUs at the cost of rack density.
- Redundant power supply (1+1 / N+1)A redundant power supply uses two or more hot-swap PSUs so the server keeps running if one fails or loses its feed. 1+1 means one spare backs one active unit; N+1 means one spare backs N active units across a larger system. Both allow live replacement without downtime.
- PCIe lanes and generations (Gen3/4/5)PCIe moves data over lanes, and each generation doubles per-lane bandwidth. Gen3 is about 1 GB/s per lane per direction, Gen4 about 2 GB/s, Gen5 about 4 GB/s. A Gen4 x16 slot delivers roughly 32 GB/s per direction; Gen5 x16 doubles that to about 64 GB/s.
Need a build that gets this right? Tell us the workload and get an EXW Dalian quote the same business day.
Request a quote